Water on the kitchen floor can come from a refrigerator, a dishwasher, or an ice line, and finding the real source matters before it reaches the cabinetry. In Moorestown homes with finished lower levels, a slow leak is worth diagnosing quickly.
Notes by Brand
The same symptom shows up differently across brands. Here is how we approach appliance leaking water on the units we service most:
- Bosch: An E15 code with water in the base pan means the leak-protection float tripped. We locate the leak, dry the pan, and reset rather than only clearing the code.
- Sub-Zero: Refrigerator leaks often trace to a clogged defrost drain or a water-line fitting. We clear the drain and inspect the connections.
- Miele: An F-code may accompany a leak. We check the door seal, base pan, and hose connections and test the intake system.
- Thermador: E15 signals the leak-protection system tripped. We find the source, dry the base, and confirm the seal and hoses.
- Cove: Leaks usually trace to the door seal, a hose connection, or the base pan. We locate the source and correct it.
- Gaggenau: E15 leak protection can trip on integrated dishwashers. We inspect the seal, hoses, and base for the leak point.
- KitchenAid: We check the door gasket, drain hose, and inlet valve. A worn gasket or a loose fitting is a common source.
Symptoms, Causes & Checks
| Symptom | Likely Cause | What We Check |
|---|---|---|
| E15 / base water | A leak-protection float tripped | Find and clear the leak, dry the base, reset |
| Water under the fridge | A clogged defrost drain or water line | Clear the drain and inspect the line |
| Door-area drip | A worn seal or misaligned door | Inspect and replace the gasket, align the door |
Safety first: Shut off the appliance water supply if a leak is active and wipe up standing water to protect the floor and cabinets. Avoid running the appliance until the source is found.
Book a diagnosis for this problem